Bnc 7000 Series User Manual Manual do Utilizador descarregar pdf (Página 22)

3.3 Measurement Tabs

The following tabs (each corresponding to a particular measurement mode), are available:

• Absolute Phase Noise,

• Additive Phase Noise, Amplitude Noise (SERIES 7000 only),

• Time Domain Analyzer (MODEL 7300 and MODEL 7070),

• FFT Analyzer.

Clicking on a tab will lead to the corresponding measurement setup. The following sections describe

each measurement tab and how to configure it to successfully perform a measurement.

3.3.1 General Tab Organization

In general, each measurement tab is organized in two sections, a SETUP and a PLOT section.

The SETUP section in the upper left corner is used to configure a particular measurement.

The PLOT section is used to display and post-process measured data. This section can be further

sub-divided in a Marker, and Trace and a Display window.

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Sem comentários

Bnc 7000 Series User Manual Manual do Utilizador Página 22