Bnc 835 Programmer Manual Manual do Utilizador descarregar pdf (Página 22)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

5 SCPI Command Description

5.1 :ABORt Subsystem

The :ABORt command is a single command subsystem. There are no subcommands or associated

data parameters, as shown below. The :ABORt command, along with the :TRIGger and :INITiate

commands, comprise the Trigger group of commands.

Command

Parameters

Unit

(default)

Remark

:ABORt

This command causes the List or Step sweep in progress to abort. Even if INIT:CONT[:ALL] is set to

ON, the sweep will not immediately re-initiate.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 64 65

Sem comentários

Bnc 835 Programmer Manual Manual do Utilizador Página 22