Bnc 835 Programmer Manual Manual do Utilizador descarregar pdf (Página 63)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

5.22 [:SYSTem:COMMunicate] Subsystem

Command

Parameters

Unit (default)

:SYSTem:COMMunicate:LAN:CONFig

DHCP|MANual|AUTO

DHCP

:SYSTem:COMMunicate:LAN:DEFaults

:SYSTem:COMMunicate:LAN:GATeway

“0.0.0.0”

:SYSTem:COMMunicate:LAN:IP

:SYSTem:COMMunicate:LAN:RESTart

:SYSTem:COMMunicate:LAN:SUBNet

“255.255.255.0”

:LAN:CONFig

:SYSTem:COMMunicate:LAN:CONFig DHCP|MANual|AUTO

:SYSTem:COMMunicate:LAN:CONFig?

This command sets the signal generator’s internet protocol (IP) address.

MANual The user assigns an IP address to the signal generator.

DHCP The network assigns an IP address to the signal generator. If DHCP fails, manual

configuration will be used.

AUTO The network assigns an IP address to the signal generator with a fallback to Auto- IP

if DHCP fails. If both DHCP and Auto- IP fail, manual configuration will be used.

:LAN:DEFaults

:SYSTem:COMMunicate:LAN:DEFaults

This command restores the instrument’s LAN settings to their factory default values.

:LAN:GATeway

:SYSTem:COMMunicate:LAN:GATeway <ipstring>

:SYSTem:COMMunicate:LAN:GATeway?

This command sets the gateway for local area network (LAN) access to the signal generator from

outside the current sub- network. The query returns the current setting, not the saved setting.

:LAN:IP

:SYSTem:COMMunicate:LAN:IP <ipstring>

:SYSTem:COMMunicate:LAN:IP?

This command sets the signal generator’s local area network (LAN) internet protocol (IP) address for

your IP network connection.

:LAN:RESTart

:SYSTem:COMMunicate:LAN:RESTart

1 2 ... 58 59 60 61 62 63 64 65

Sem comentários

Bnc 835 Programmer Manual Manual do Utilizador Página 63