Bnc 1105 Universal Counter Manual do Utilizador descarregar pdf (Página 114)

114

114114

114



A fail will be returned if the result is less than the lower limit, but when the result is

equal to the lower limit, the counter will not report a fail.

Notes



The lower limit will be set to 0 after the counter has been turned off or a remote

interface reset.



Setting a new lower limit will clear the limit counts

(:CALC2:LIM:FCO, :CALC2:LIM:PCO).



If the limit testing is on (:CALC:MATH:STATe ON), user should consider the scaled

and offset results when specifying the limit.

:CALCulate2:LIMit:UPPer[:DATA] <numeric value> [HZ|S|DEG]

Sets or queries the upper limit in the limit test.

Return



Numeric value transferred as ASCII bytes in <NR3> format with eleven significant

digits.



A fail will be returned if the result is greater than the upper limit, but when the result

is equal to the upper limit, the counter will not report a fail.

Notes



The upper limit will be set to 0 after the counter has been turned off or a remote

interface reset.



Setting a new upper limit will clear the limit counts

(:CALC2:LIM:FCO, :CALC2:LIM:PCO).



If the limit testing is on (:CALC:MATH:STATe ON), user should consider the scaled

and offset results when specifying the limit.

The command :CALCulate3

This group performs statistics calculation and data transfer.

:CALCulate3:AVERage:ALL?

Queries all of the four statistics results: mean value, standard deviation, maximum value

and minimum value.

Return



Numeric data transferred as ASCII bytes in <NR3> format. The number of significant

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 196 197

Comentários a estes Manuais

Sem comentários

Bnc 1105 Universal Counter Manual do Utilizador Página 114

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Bnc 1105 Universal Counter