Bnc 1105 Universal Counter Manual do Utilizador descarregar pdf (Página 157)

157

157157

157

Return

 The format of the response is according to the specification made in :FORMat[:DATA]

ASCii|REAL command.

 If using the ASCII format, the numeric data is transferred as ASCII bytes in <NR3>

format with eleven significant digits.

Note

 If the display screen is not able to show all the significant digits, the displayed value

is rounded so that it is different from the actual value, but press the softkey under

ENTER while it is in the 11-digit display can change the actual offset value to the

displayed value.

:TRACe[:DATA] SCALE, <numeric value>

:TRACe[:DATA] SCALE, <arbitrary block>

Sets the scale value. The range for scale value is from -9.999999E+12 to -1.000000E-13,

0.0000000000, and from +1.000000E-13 to +9.999999E+12. The resolution is 7 digits.

Notes

 The offset value will be set back to 1.000000 after the counter has been turned off or

after a remote interface reset.

 Specifying a new offset value will clear the limit counts

(:CALC2:LIM:FCO, :CALC2:LIM:PCO).

:TRACe[:DATA]? SCALE

Queries the scale value.

Return

 The format of the response is according to the specification made in :FORMat[:DATA]

ASCii|REAL command.

 If using the ASCII format, the numeric data is transferred as ASCII bytes in <NR3>

format with eleven significant digits.

Note

 If the display screen is not able to show all the significant digits, the displayed value

is rounded so that it is different from the actual value, but press the softkey under

ENTER while it is in display can change the actual offset value to the displayed value.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 196 197

Sem comentários

Bnc 1105 Universal Counter Manual do Utilizador Página 157